Learn about Allen Bradley's Micro820 PLC, Powerflex 525 AC drive, and Panelview 800 HMI with the PLC trainer.

This will get you started on your PLC programming career path.  Designed for both schools and individuals who wish to learn more than the basic trainers and instruction manuals can teach.

• The Micro820 PLC includes 12 discrete 24VDC inputs, 7 discrete 24VDC outputs, 4 0-10VDC analog inputs (first four discrete inputs can be configured for analog), and 1 0-10VDC analog output.  It uses the free Allen Bradley Connected Components Workbench software.

• The HMI is an Allen Bradley Panelview 800 and uses these HMI lessons of Connected Components Workbench.

The Powerflex 525 AC drive is wired to the 3 phase fan and communicates with the PLC over Ethernet.

The trainer requires 120VAC and plugs into your typical wall outlet.

In addition to learning PLC programming and troubleshooting, these lessons will teach you how to wire and diagnose control systems.  This curriculum will help you gain valuable insight into how industrial control panels are wired and operate.  All circuits in these self paced lessons are 24VDC.

These trainers are built to order and typically take 1-2 Weeks to ship depending on availability of parts.

Lessons compatible with this trainer

What Your Trainer Includes and Part Number Explanation: TRN-XXX-YYY-ZZZ

• XXX

  • BAS - Basic:

    • Push Button - Four push buttons.  A green, yellow, red, and blue momentary push button.  One normally open (NO) contact and one normally closed (NC) contact each.

    • Selector Switch 2 Position - Two 2 position selector switches.  One normally open (NO) contact each.

    • Selector Switch 3 Position - Two 3 position selector switches.  Two normally open (NO) contacts each.

    • Lights - Four lights colored green, yellow, red, and blue.

    • 24VDC Power Supply - 24VDC 60 watt switching power supply.

    • Terminal blocks - For connecting to the 24VDC power supply.  You may add more as you customize your trainer.

    • Wires - 50 wires.

    • Ethernet Cable - 10 foot.

• ICP - Basic options plus:

  • AC Drive and 3 Phase Motor - 120VAC input and 240VAC 3 phase output so this trainer can be used to learn about 3 phase power yet plugs into a standard wall outlet.

  • Red Mushroom Button - Maintained with two normally open (NO) contacts.

  • Contactor Relay - Double pole double throw which means it has two sets of contacts with both normally open and normally closed positions.

  • Analog. 5K potentiometer and meter with 0-10VDC + 4-20mA .

• YYY - PLC Option

• ZZZ - Addition Options:

  • HMI - Operator Interface Touchscreen. Panelview 800 and mounting bracket.

  • LMC - Linear Motion Control with Linear Actuator

These trainers are built to order and typically take 1-2 Weeks to ship depending on availability of parts.